L/S Precision Modular Drives with Bench Top Controller

Modular drives let you place motor and controller where convenient—ideal for limited spaces, hoods, or isolation chambers

Flow rate 0.06 to 3400 mL/min (depends on drive rpm and tubing size)

Three-digit LED display shows motor rpm—confirm speed setting at a glance

Membrane keypad for easy up-front control of speed, direction, and start/stop

Reversible motor; purge tubing before or after pumping; pump fluid in either direction

LED indicators confirm motor direction

Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications

Separate speed and power (on/off) control; maintain speed setting while turning pump on/off

±0.25% speed control; meter and transfer fluids with accuracy and repeatability

Remote control capabilities via a DB9 female connector on back of drive: Speed control input 4 to 20 mA or 0 to 10 V; Pump direction (CW/CCW) via open collector or contact closure; Start/stop via open collector or contact closure

Splash-resistant ABS plastic controller housing is IP33 rated; drive housing is epoxy finished steel, IP33 rated

6-ft (1.8-m) cable connects drive and controller; use optional extension cable 07557-51 to extend to 15 ft (4.6 m)